Four Sparkworks Inputs to Try in Your Enshrouded Base
Choose between a Lever, Push Button, Pressure Plate and Trigger Zone based on how you want your Enshrouded build to respond.
In Enshrouded 1.0, a Lever keeps its last setting, a Push Button sends a short pulse, a Pressure Plate responds to weight on it, and a Sparkworks Trigger Zone can react to players entering an area. Pick the input based on what should turn the signal off. That choice matters as much as which light, door, or other compatible object you connect.
Lever for lights that should stay on
Pull a Lever to switch on the lights in a workshop you’re using for a while. The signal holds until someone flips the Lever again. Put it where you’ll pass on your way out so you can switch everything off. A Push Button would send a short pulse, which is handy for a quick cue but gives you the wrong starting signal for steady light.
Push Button for a quick signal
A Push Button briefly sends an on signal and resets by itself. Use it when a visitor should be able to fire a compatible sound as a doorbell, or when you want to test whether an output responds to a single press. If you need the output to stay on until the next press, start with a Lever. How long an effect plays depends on the connected output and any logic you add.
Pressure Plate for a signal underfoot
A Pressure Plate stays on while something stands on it. Use one where someone deliberately stops, like a marked tile that lights up a clue in an adventure build. If you wire a door directly to a plate, check what happens the moment you step off to walk through. Start by trying one compatible door. For a doorway that needs to react to people across a wider area, look at the Trigger Zone instead.
Sparkworks Trigger Zone for a player-only entrance
Set a Sparkworks Trigger Zone to its player-only filter to trigger a compatible door when someone enters the area without wildlife setting it off. Approach the entrance from both sides and check what happens as you leave the zone. The filter selects a category, so other players can also set it off. If you just want a door visitors can operate from a single spot, a wall-mounted control gives them a deliberate action.
Try each input with one output before adding a Switchbox and more logic. If the output never responds, check whether that exact object can receive a Sparkworks signal. The original Sparkworks reveal explains what Keen built the system for.
Find more guides for the released game in the Enshrouded hub.
